Pneumatic device (with reverse mode) designed for piercing and pipe ramming
HP95 / HP95K
Pneumatic piercing&ramming devices / Piercing & ramming universal devices
Product description
Application
- Hand installation of Ø125mm plastic pipes
- Hand installation of Ø25-75mm plastic pipes
- Hand installation of Ø90mm plastic pipes
- Installation of corrugated pipes Ø110mm in the second operation
- Installation of fibre cables, power and gas lines
- Installation of Ø110mm plastic pipes in the second operation
- Mini piling of Ø100mm steel pipes
- Ramming of Ø100mm,Ø159mm steel pipes with use of cone
- Ramming of Ø80mm steel pipes
Additional informations
HP95 is a basic version of piercing tool with the simpliest design built for piercing and hand installation of pipes usingdedicated adaptor or mechanically using steel rope and tension plate. This equipment enables puling 110mm and bigger pipes in the second operation using expander. HP95 mole can also be equipped with towing loop enabling pulling Ø75mm pipes into made bore in reverse mode.
HP95 mole has significant inertion which has positive impact on performane in wet soils
HP95 mole is available in few versions depending on the purpose of the device:
- "M" symbol stands for double end nut. Far nut called pulling sleeve enables direct pulling of Ø75mm pipes in the firstoperation or Ø90mm with bigger sleeve installed. Other features are identical with standard HP95 mole
- "V" symbol stands for not demountable Ø115mm expansion on the back of the mole enabling piercing for Ø90mmpipe installation
- "W"symbol stands for not demountable Ø135mm expansion on the back of the mole enabling piercing for Ø110mm pipeinstallation in the first operation.
- "P" symbol stands for the mole with pneumatic control of the reverse mode. This type of steering is available for allthe above versions of HP95 mole and requires pneumatic steering station
- "R" symbol stands for the mole equipped with active head. These types of moles are statistically more accurate with higher speed in harder soil. You can find more information about moles with active head in:
PRODUCTS ---> ACTIVE HEAD PIERCING DEVICES bookmark on our website.
- "K" symbol stands for shorter version that standard HP95. Hammer has low weight, low air consumption and has good work characteristic. HP95K is handy and comfortable to use. Works best in eareas with limited excavated space.
due to shorter corpse HP95K is statistically less accurate than standard HP95. It's recommended to use for piercings under 12m in soild without stones. That limitation doesn't apply to moles with active head which compensate lower accuracy. Power factor is smaller than normal HP95 but considering its size and usability we would recommend it.
Photo. HP95 with example set of accessories
Technical data
HP95/M | HP95P/PM | HP95V/PV | HP95W/PW | HP95K | |
suggested use - PE pipes installation Ø[mm] | 63-75 | 63-75 | 75-110 | 90-125 | 63-75 |
possible use - PE pipes installation Ø[mm] | 25-140 | 25-140 | 25-140 | 25-140 | 25-110 |
possible use - steel pipes ramming Ø[mm] | 80-159 | 80-159 | 80-159 | 80-159 | 80-140 |
diameter [mm] | 95 | 95 | 95/115 | 95/140 | 95 |
lenght [mm] | 1515 | 1515 | 1515 | 1515 | 1260 |
weight [kg] | 54 | 53 | 58 | 67 | 42 |
impact frequency [Hz] | 5,5 | 5,5 | 5,5 | 5,5 | 6 |
expansion in the second operation [mm] |
115, 130 146, 160 |
115, 130 146, 160 |
130, 146 160 |
160
|
130
|
lenght of drilling [m] | ≤20 | ≤20 | ≤20 | ≤20 | ≤15 |
air consumption [m3/min] |
2,3 | 2,0 | 2,3/2,0 | 2,3/2,0 | 2,2 |
nominal working pressure [bar] | 5,0-6,0 | 5,0-6,0 | 5,0-6,0 | 5,0-6,0 | 6.0-7.0 |