Piercing & ramming
devices

HP135

Pneumatic piercing&ramming devices / Piercing & ramming universal devices

24 mths Warranty
36 Device tightness warranty
CE certificate Zobacz videoprezentację

Product description

Pneumatic device (with reverse mode) designed for piercing and pipe ramming

Application

  • Please look at tables above
    Required equipment

Additional informations

HP135 is a basic version of piercing tool with simply design for piercing and hand installation of pipes using dedicated adaptor or mechanically using steel rope and tension plate. This equipment enables puling Ø110mm or Ø125mm pipes directly behind the mole in the first operation. Pulling pipes with diameter Ø140mm and larger is possible in the second operation with the use of expander.

HP135 mole is also be equipped in towing loop enabling Ø110mm pipe puling in the reverse mode into made bore.

HP135 is a hammer with increased weihgt of piston up to 50kg (we're the only manufacturer that have achieved such weight). Tool has significant inertion that positively affect performance in wet soil in which sway effect may occur. HP135 mole is a very accurate mole with powerful stroke.


Additional advantages:

- increased- easy lauch into the ground

- soft start
- higher efficiency while working with expander in wet (spring) clays
- high power of the reverse mode
- very positive work characteristic
- effective and easy work with expanders

Reverse mode is applied by pulling air supply hose or by changing position of the valve built into pneumatical steering station ("P" versions).

HP135 mole is available in few versions depending on the purpose of the device:

- "M" symbol stands for double end nut. Further nut called pulling sleeve enables direct pulling of Ø110mm or Ø125mm pipes directly behind the mole in the first operation

- "V" symbol stands for not demountable expansion in the rear part of the corpse Ø155-170mm (depending on customers choice).   It enables piercing of the hole for 140mm pipe installation directly behind the mole in the first operation.

- "W" symbol stands for not demountable expansion in the rear part of the corpse Ø200mm. It enables piercing of the hole for Ø160mm pipe installation directly behind the mole in the first operation

- "P" symbol stand the model with pneumatical reverse mode. This type of steering is available for each of the mole listed above. It requires special pneumatical steering station and air supply hose fo "P" versions.

- "R" symbol stand for the mole with active piercing head (moving head). These types of moles characterizes with higher accuracy and increased speed of piercing in hard soil. More information is available on our website:
PRODUCTS ---> ACTIVE HEAD PIERCING DEVICES

Photo. HP135P with example set of accessories 

Technical data

 

  HP135/M HP135P/PM HP135V/PV HP135W/PW
suggested use - PE pipes installation Ø[mm] 90-125 90-125 125-140 140-160

suggested use - corrugated pipe installation Ø[mm]

110 110 140 160
possible use - PE pipes installation Ø[mm] 25-200 25-200 25-200 25-200
possible use - steel pipe ramming Ø[mm] 80-324 80-324 80-324 80-324
diameter [mm]  135 135 135/165 135/200
lenght [mm]  1880 1880 1880  1880
weight [kg]  128 128 140 159
impact frequency [Hz]  4,5 4,5 4,5 4,5
lenght of drilling [m]  ≤20 ≤20 ≤20 ≤20
expansion in the second operation Ø[mm]

160,190

200,220

160, 190

200, 220

160, 190

200, 220

190, 200

220

lenght of ramming Ø219mm pipe ≤20 ≤20 ≤20 ≤20
suggested lenght of piercing [m] ≤20 ≤20 ≤20 ≤20
air consumption [m3/min]  3,2 2,8 3,2/2,8 3,2/2,8
nominal working pressure [bar]  5,0-7,0  5,0-7,0 5,0-7,0 5,0-7,0